MSI RD480 Neo2 - Manual (Page 52)

3-7
BIOS Setup
Device/ Vender/ Size
It will showing the device information that you connected to the IDE/SATA con-
nector .
Type
Select the type of IDE device. Setting options: [Not Installed], [Auto], [CD/DVD],
[ARMD].
LBA/Large M ode
This allows you to enable or disable the LBA Mode. Setting to Auto enables LBA
mode if the device supports it and the devices is not already formatted with LBA
mode disabled. Setting options: [Auto], [Disabled].
DM A M ode
Select DMA Mode.
Hard Disk S.M.A.R.T.
This allows you to activate the S.M.A.R.T. (Self-Monitoring Analysis & Reporting
Technology) capability for the hard disks. S.M.A.R.T is a utility that monitors your
disk status to predict hard disk failure. This gives you an opportunity to move
data from a hard disk that is going to fail to a safe place before the hard disk
becomes offline. Setting options: [Auto], [Enabled], [Disabled].
Floppy A
This item allows you to set the type of floppy drives installed. Available options:
[None], [360K, 5.25 in.], [1.2M, 5.25 in.], [720K, 3.5 in.], [1.44M, 3.5 in.], [2.88M, 3.5 in.].
Halt On
The setting determines whether the system will stop if an error is detected at boot.
Available options are:
[No Errors] The system doesn ’t stop for any detected error.
[All, But Keyboard] The system doesn ’t stop for a keyboard error.