MSI RD480 Neo2 - Manual (Page 63)

3-18
MS-7194 ATX Mainboard
Resume By PS/2 M ouse
This setting determines whether the system will be awakened from what power
saving modes when input signal of the PS/2 mouse is detected. Setting options:
[Disabled], [Enabled].
Resume by PCI Device (PME#)
W hen setting to [Enabled], this setting allows your system to be awakened from
the power saving modes through any event on PME (Power Management Event).
Setting options: [Disabled], [Enabled].
Resume by PCIE Device (PM E#)
W hen setting to [Enabled], this setting allows your system to be awakened from
the power saving modes through any event on PME (Power Management Event)
from the PCIE device. Setting options: [Disabled], [Enabled]
Resume by RTC Alarm
This is used to enable or disable the feature of booting up the system on a
scheduled time/date from the S3, S4, and S5 state. Setting options: [Disabled],
[Enabled].
Date
W hen the Resume by RTC Alarm set to
“Enable”, this item will be available. This
allows you to set the system to the date that you want (usually the current date).
The format is <day><month> <date> <year>.
Time (HH:MM:SS)
W hen the Resume by RTC Alarm set to
“Enable”, this item will be available. This
allows you to set the system time that you want (usually the current time). The
time format is <hour> <minute> <second>.