Kodak DP800 - Manual (Page 13)

Contents
13
Using external speakers
You can connect external speakers to the Projector in
two ways:
1. Powered speakers (Speakers with built in amplifier).
These speakers can be connected directly to the
audio out connectors on the Projector amplifier.
2. Amplifier. Connect the amplifier to the audio out on
the Projector.
When external speakers are connected, These can be
turned on or off from the Projector. To control the inter-
nal speakers, see section on
Adjust audio
settings, page 44.
Evaluating the environmental
conditions
Light conditions
The Projector will display a high brightness image, even
under normal light conditions and does not require any
special considerations with respect to lighting. However,
if you want to optimise the presentation environment,
these are some of the aspects you may want to take
into consideration:
Please take care to avoid direct and indirect light on the
projection screen, as it will reduce the contrast of the
image, and the quality of your presentation.
Further you should avoid light from the ceiling between
the Projector and the projection screen. Behind the Pro-
jector, where the audience usually are, you could allow
some more light, allowing the audience to see enough
to for example take notes.
6 Using the Projector