Projector – Kodak DP800 User Manual
Page 38
38
Projector:
When you select this icon you get the window below.
In this window you can tune the values for the parame-
ters Htot, Hsize and Vsize.
The Projector has 15 different set-ups to choose,
and will automatically configure the Projector to the
correct mode.
The purpose of these Advanced Adjustments is that
you, as a user can manually override all parameters,
and fine tune settings to make them fit your particular
application exactly. This is very useful if you, eg. have a
scaleable graphics board.
NB! If you find, that adjusting the parameters here
reduces image quality, press DEFAULT to return to
factory settings.
NB! Make sure both the Hsync and Vsync values
are within the Projector specifications.
Advanced picture adjustments
Advanced picture adjustments