Kodak DP800 - Manual (Page 47)

4.
Contents
47
2. Open the lamp lid, using a coin or similar tool, by
turning the lock 90º anti-clockwise.
3. Turn the screw of the lamp module anti-clockwise,
and pull the lamp module out of the Projectorusing
the small handle.
4. Take the new lamp module out of its package and
slide it into the Projector.
5. Fasten the screw of the lamp module by pushing it
in and turning it clockwise.
6. Close the lamp lid by turning the lock 90º clockwise.
It is not possible to switch on the Projector without
the lid closed.
7. When the lamp module has been replaced, reset
the lamp counter by selecting the icon with the
lamp in the MAIN MENU. Select the Reset button.
3. 2. 1.
Fig. 14, Changing/installing the lamp