Kodak DP800 - Manual (Page 23)

Contents
23
AppleTalk:
To turn off AppleTalk do the following:
1) Select Chooser from the Apple menu
2) Select the Inactive radio button in the AppleTalk
area (lower righthand side of the window)
3) You may have to restart your Macintosh
Using the Remote Controller:
Make sure to complete the procedures above. To open
the Remote Controller (control panel) double click on
the icon in the control panel folder. Each time you open
the control panel, it will check to see if the mouse driver
is installed in the system. If it is not, the driver will be
installed and activated automatically. You do not need to
turn it on or restart.
Figure 1 shows control panel.