Kodak DP800 - Manual (Page 30)

Contents
30
A typical level 2 window
Above is a typical level 2 window. All these windows
have a number of controls and at least two buttons, one
OK-button and one Cancel-button. After having done
the changes you wish to do, select the OK-button to
save the new settings and exit the window. If you want
to exit the window without saving the changes you
made, select the Cancel-button. You select the buttons
by moving the mouse pointer over them, and click the
button underneath the Interactive Remote control, or by
using the Enter key on the Control Panel.
The window above also has two slide controls and a
check box. You change the slide controls by moving the
mouse pointer over the arrow buttons and press the
button underneath the Interactive Remote control, or
the Enter key on the Control Panel. To change the state
of the check box, move the mouse pointer over it, and
press the button underneath the Interactive Remote
control, or by pressing the Enter key on the Control
Panel.
NOTE In order to make your changes effective,
always remember to click OK.
Removing the MAIN MENU
To remove the menu system press the MENU key on
the Interactive Remote Control or on the control panel
on the Projector. It will also disappear automatically
after 20 sec.
How to change the settings