Kodak DP800 - Manual (Page 48)

Contents
48
Changing fuses
The fuse is next to the On/Off switch at the back of the
Projector.
1. Remove the thin plastic lid covering the voltage
selector. Do not use excessive force, the lid can
easily be damaged.
2. Pull out the fuse assembly and replace the fuse
with a fresh one.
3. Insert the fuse assembly.
4. Mount the plastic lid.
5. Connect the Projector to the wall outlet,
and switch it on.
User spare parts
You should always have the following spare
parts available:
◆
Lamp
◆
Batteries for the remote controls
◆
Fuses
WARNING! Never work inside the Projector
if it is connected to the mains! Always
unplug it from the wall outlet when
changing fuse!