Kodak DP800 - Manual (Page 25)

Contents
25
The options popup menu:
Figure 2 shows control panel:
The Options Menu
The options menu (figure 2) allows you to associate
certain actions with pressing the secondary button
(small grey key) on top of the Interactive Remote Con-
trol. There are 5 pre-defined selections as well as Cus-
tom (see below). As an example, say that you want the
secondary button to emulate the Enter key. Simply
choose the Enter key item in the popup menu and the
software will link your choice to the secondary button.
Now, every time you press the secondary button the
driver will pass that action, (in this example, enter key
pressed) to the front application.
The Custom Settings area:
Selecting Custom from the options popup menu will
activate the Custom Settings area. As long as the title
Custom Settings is blinking, the control panel will
record any combination of key strokes and / or mouse
clicks. Clicking cancel will stop recording and return you
to the previously selected popup menu item. Clicking
done will record your key strokes (clicks) and make that
combination the current setting for the secondary
button. Remember, while recording a sequence, do not
inadvertently click on the done or cancel buttons.
General and Special features:
The button underneath the Interactive Remote Control
acts as the primary button or your standard Macintosh
mouse button.
If you press the primary button and the secondary
button (regardless of the action setting) you will activate
the sticky button (button lock) feature. You can then
release both buttons (first the secondary button) but
leave the system in a mouse-down state. This can be