Lenovo ThinkServer TD200 - Manual (Page 16)

Notes:
a. If you choose to use a static IP address, you must specify the IP address, the
subnet mask, and the default gateway.
b. You can also use the Setup Utility to select a dedicated or shared IMM
network connection. On the Network Configuration screen, select
Dedicated
or Shared in the Network Interface Port field.
c. To find the locations of the Ethernet connectors on your server that are used
by the IMM, see the documentation that came with your server.
8. Select Save Network Settings.
9. Exit from the Setup Utility.
Notes:
1. You must wait approximately 1 minute for changes to take effect before the
server firmware is functional again.
2. You can also configure the IMM network connection through the IMM Web
interface. For more information, see “Configuring network interfaces” on page
28.
Logging in to the IMM
Important: The IMM is set initially with a user name of USERID and password of
PASSW0RD
(with a zero, not the letter O). This default user setting has
Supervisor access. Change this default password during your initial
configuration for enhanced security.
To access the IMM through the IMM Web interface, complete the following steps:
1.
Open a Web browser. In the address or URL field, type the IP address or host
name of the IMM server to which you want to connect.
2. Type your user name and password in the IMM Login window. If you are
using the IMM for the first time, you can obtain your user name and password
from your system administrator. All login attempts are documented in the
event log. Depending on how your system administrator configured the user
ID, you might need to enter a new password.
3. On the Welcome Web page, select a timeout value from the drop-down list in
the field that is provided. If your browser is inactive for that number of
minutes, the IMM logs you off the Web interface.
Note: Depending on how your system administrator configured the global
login settings, the timeout value might be a fixed value.
4. Click Continue to start the session.
The browser opens the System Status page, which gives you a quick view of
the server status and the server health summary.
For descriptions of the actions that you can perform from the links in the left
navigation pane of the IMM Web interface, see “IMM action descriptions” on
page 11. Then, go to Chapter 3, “Configuring the IMM,” on page 15.
10 Integrated Management Module: User Guide