Lenovo ThinkServer TD200 - Manual (Page 82)

Command syntax
Read the following guidelines before you use the commands:
v Each command has the following format:
command [arguments] [-options]
v The command syntax is case sensitive.
v The command name is all lowercase.
v All arguments must immediately follow the command. The options immediately
follow the arguments.
v Each option is always preceded by a hyphen (-). An option can be a short option
(single letter) or a long option (multiple letters).
v If an option has an argument, the argument is mandatory, for example:
ifconfig eth0 -i 192.168.70.34 -g 192.168.70.29 -s 255.255.255.0
where ifconfig is the command, eth0 is an argument, and -i, -g, and -s are
options. In this example, all three options have arguments.
v Brackets indicate that an argument or option is optional. Brackets are not part of
the command that you type.
Features and limitations
The CLI has the following features and limitations:
v Multiple concurrent CLI sessions are allowed with different access methods
(Telnet or SSH). At most, two Telnet command-line sessions can be active at any
time.
Note: The number of Telnet sessions is configurable; valid values are 0, 1, and 2.
The value 0 means that the Telnet interface is disabled.
v One command is allowed per line (160-character limit, including spaces).
v There is no continuation character for long commands. The only editing function
is the Backspace key to erase the character that you just typed.
v The Up Arrow and Down Arrow keys can be used to browse through the last
eight commands. The history command displays a list of the last eight
commands, which you can then use as a shortcut to execute a command, as in
the following example:
system> history
0 ifconfig eth0
1 readlog
2 readlog
3 readlog
4 history
system> !0
-state enabled
-c dthens
-i 192.168.70.125
-g 0.0.0.0
-s 255.255.255.0
-n IMMA00096B9E003A
-r auto
-d auto
-m 1500
-b 00:09:6B:9E:00:3A
-l 00:00:00:00:00:00
system>
76 Integrated Management Module: User Guide