Lenovo ThinkServer TD200 - Manual (Page 28)

v Adapter Configuration - Advanced: A user has no restrictions when
configuring the IMM. In addition, the user is said to have
administrative access to the IMM, meaning that the user can also
perform the following advanced functions: firmware updates, PXE
network boot, restore IMM factory defaults, modify and restore IMM
configuration from a configuration file, and restart and reset the
IMM.
When a user sets the authority level of an IMM login ID, the resulting
IPMI privilege level of the corresponding IPMI User ID is set according
to these priorities:
v If the user sets the IMM login ID authority level to Supervisor, the
IPMI privilege level is set to Administrator.
v If the user sets the IMM login ID authority level to Read Only, the
IPMI privilege level is set to User.
v If the user sets the IMM login ID authority level to have any of the
following types of access, the IPMI privilege level is set to
Administrator:
– User Account Management Access
– Remote Console Access
– Remote Console and Remote Disk Access
– Adapter Configuration - Networking & Security
– Adapter Configuration - Advanced
v If the user sets the IMM login ID authority level to have Remote
Server Power/Restart Access or Ability to Clear Event Logs, the IPMI
privilege level is set to Operator.
v If the user sets the IMM login ID authority level to have Adapter
Configuration (Basic), the IPMI privilege level is set to User.
Note: To return the login profiles to the factory defaults, click Clear
Login Profiles
.
8. In the Configure SNMPv3 User area, select the check box if the user should
have access to the IMM by using the SNMPv3 protocol. After you click the
check box, the configuration settings for SNMPv3 appear. Use following fields
to configure the SNMPv3 settings for the user profile:
Authentication Protocol
Use this field to specify either HMAC-MD5 or HMAC-SHA as the
authentication protocol. These are hash algorithms used by the
SNMPv3 security model for the authentication. The password for the
Linux account will be used for authentication. If you choose None,
authentication protocol is not used.
Privacy Protocol
Data transfer between the SNMP client and the agent can be protected
using encryption. The supported methods are DES and AES. Privacy
protocol is valid only if the authentication protocol is set to either
HMAC-MD5
or HMAC-SHA.
Privacy Password
Use this field to specify the encryption password.
Confirm Privacy Password
Use this field to confirm the encryption password.
22 Integrated Management Module: User Guide