Ntp command, Syntax, Description – Lenovo ThinkServer TD200 User Manual
Page 91
Option
Description
Values
-l
Login permission
attribute
String of up to 63 characters for string
-m
Domain source
Extract search domain from login ID, use only
configured search domain, try login first then
configured value
-n
Service name
String of up to 15 characters for service_name
-p
Client password
String of up to 15 characters for client_pw
-pc
Confirm client
password
String of up to 15 characters for confirm_pw
Command usage is: ldap -p client_pw -pc confirm_pw
This option is required when you change the client
password. It compares the confirm_pw argument with
the client_pw argument, and the command will fail if
they do not match.
-r
Root entry
distinguished name
(DN)
String of up to 63 characters for root_dn
s1ip
Server 1 host name/IP
address
String of up to 63 characters or an IP address for host
name/ip_addr
s2ip
Server 2 host name/IP
address
String of up to 63 characters or an IP address for host
name/ip_addr
s3ip
Server 3 host name/IP
address
String of up to 63 characters or an IP address for host
name/ip_addr
s1pn
Server 1 port number
A numeric port number of up to 5 digits for
port_number.
s2pn
Server 2 port number
A numeric port number of up to 5 digits for
port_number.
s3pn
Server 3 port number
A numeric port number of up to 5 digits for
port_number.
-u
UID search attribute
String of up to 23 characters for search_attrib
-v
Get LDAP server
address through DNS
Off, on
-w
Allows wildcards in
the group name
Off, on
-h
Displays the command
usage and options
ntp command
Syntax
ntp [options]
options:
-en state
-i
hostname
-f
frequency
-synch
Description
Use the ntp command to display and configure the Network Time Protocol (NTP).
Chapter 7. Command-line interface
85