Lenovo ThinkServer TD200 - Manual (Page 64)

To perform server power and restart actions, complete the following steps.
Note: Select the following options only in case of an emergency, or if you are
offsite and the server is nonresponsive.
1. Log in to the IMM. For more information, see Chapter 2, “Opening and using
the IMM Web interface,” on page 9.
2. In the navigation pane, click Power/Restart. Scroll down to the Server
Power/Restart Control
area.
3. Click one of the following options:
Power on server immediately
Turn on the server and start the operating system.
Power on server at specified time
Turn on the server at a specified time and start the operating system.
Power off server immediately
Turn off the server without shutting down the operating system.
Shut down OS and then power off server
Shut down the operating system and then turn off the server.
Shut down OS and then restart server
Restart the operating system.
Restart the server immediately
Turn off and then turn on the server immediately without first shutting
down the operating system.
Schedule Daily/Weekly Power and Restart Actions
Shut down the operating system, turn off the server at a specified daily or
weekly time (with or without restarting the server), and turn on the server
at a specified daily or weekly time.
A confirmation message is displayed if you select any of these options, and you
can cancel the operation if it was selected accidentally.
Remote presence
Notes:
1. The IMM remote presence function is available only in IMM Premium.
2. The remote control feature available only through the IMM Web interface. You
must log in to the IMM with a user ID that has Supervisor access to use any of
the remote control features.
You can use the remote presence function, or remote control feature in the IMM
Web interface, to view and interact with the server console. You can also assign to
the server a CD or DVD drive, diskette drive, USB flash drive, or disk image that
is on your computer.
The remote control feature provides the following functions:
v Remotely viewing video with graphics resolutions up to 1280 x 1024 at 75 Hz,
regardless of the server state
v Remotely accessing the server, using the keyboard and mouse from a remote
client
v Mapping the CD or DVD drive, diskette drive, and USB flash drive on a remote
client, and mapping ISO and diskette image files as virtual drives that are
available for use by the server
58 Integrated Management Module: User Guide