Konica Minolta bizhub 200 - Manual (Page 190)

Setting up the VXL/VPS driver (Windows Vista) 7
200/250/350 7-5
Configure tab
2
Note
To display the Configure tab in Windows Vista, right-click the icon of the
installed printer, and then click “Properties”.
You cannot use the “Acquire Device Information” function if you are not
connected to or able to communicate with this machine.
Settings tab
Check Driver Version Displays the version information of the printer driver.
Item Function
Item Function
Device Option Specifies the status of the options that are installed on this
machine and the status of the user authentication and ac-
count track functions. Specify the status of each item from
the “Setting” drop-down list.
Acquire Device Information Communicates with this machine to read the status of the
installed options.
Acquire Settings Specifies the status of the connection that executes getting
the option information.
Software Tools Starts up software tools such as PageScope Web Connec-
tion.
Item Function
EMF Spool When using an original system environment, select this
check box if a metafile (EMF) spool is required.
This function is only available with the Windows Vista PCL
driver (VXL).
Display Constraint Message Displays a message when functions that cannot be speci-
fied at the same time were enabled from the printer driver.
Display paper set in Print Server
Properties. Uses the paper that was added in [Server Properties] of the
printer folder.
Popup Authentication Dialog
when printing Displays the User Authentication/Account Track dialog box
when a print job is specified to enter the user name and de-
partment name.
Save Custom Size Saves the custom paper sizes.
This function is only available with the Windows Vista PCL
driver (VXL).