Konica Minolta bizhub 200 - Manual (Page 263)

Setting up the PPD driver (Mac OS X) 10
200/250/350 10-14
If a print job is sent using a department name or password that is not a
registered account or if a job is sent without the “Track Account” check
box selected, this machine cannot authenticate the operation and cannot
print. When this occurs, the sent job is deleted.
The file name for Save in User Box is displayed when the document is se-
lected on this machine’s control panel. Up to 30 characters (alphanumer-
ic characters, spaces, and symbols !# $ % & ' ~ = \ | ; : * ` / ? @ _ - . , ( ) [
] { } < >) can be entered in the “File Name” text box. Be sure to enter a
user-friendly file name.
In User Box Number, specify the number of the box that was created. For
public boxes, enter “1”.
When user authentication is specified on this machine and the Enhance
Security mode is enabled or when Access Lock is enabled on the soft-
ware DIP switch, the corresponding user may be locked out and denied
access if the authentication information is not entered correctly.
When performing user authentication on the machine and Synchronize is
specified, you can print by inputting the user name and password in User
Authentication.
For details on user authentication and Enhance Security mode, refer to
User’s Guide [Copy Operations].
!
Detail
Print the document from the control panel of this machine. For details, re-
fer to “Print job management” on page 11-78.
Proof and Print can be specified when “Collated” is specified.
When a password rule is enabled on this machine, passwords that are
usable in Secure Print are limited and jobs are deleted when a password
that does not meet the password rule is entered. For the password rules,
refer to User’s Guide [Copy Operations].