Konica Minolta bizhub 200 - Manual (Page 291)

Various settings 11
200/250/350 11-24
4
Touch either [Bit Selection] or [HEX Selection], and then specify the
setting.
– To specify Bit selec-
tion, touch [Bit Se-
lection], touch [
←] or
[ →] to move the cur-
sor to the bit to be
changed, type in the
value using keypad,
and then touch [Set]
on the lower right of
the screen.
– To specify Hex Se-
lection, touch [HEX
Selection], specify
the value by using
keypad and by
touching [A] to [F],
and then touch [Set]
on the lower right of
the screen.
5
To change the setting for a different mode, repeat steps 3 and 4.
6
Touch [Enter] on the upper right of the screen until the first screen ap-
pears.