Konica Minolta bizhub 200 - Manual (Page 207)

Setting up the VXL/VPS driver (Windows Vista) 7
200/250/350 7-22
6
Select the row that was added to the list, and then specify the print set-
tings in “Add/Edit”.
– Page Number: Enters the page number. When entering multiple
page numbers, separate the page numbers with commas such as
“2, 4, 6” or enter a page range using a hyphen such as “6-10”.
– Print Type: Specifies Print Insert, Insert Blank Sheet, Print (1-Sid-
ed), and Print (2-Sided).
– Paper Tray: Specifies the paper tray.
7
Click the [OK] button.
2
Note
To change existing print settings, select the desired row and change the
settings. To delete existing print settings, select the desired row, and
then click the [Delete] button.
Click the [Up] or the [Down] button to change the page number starting
with the smallest page number.
The list name can be changed by clicking the [Edit List Name] button.
The “Per Page Setting” function is only available with the Windows Vista
PCL driver (VXL).
2
Reminder
The Save in User Box, Save in User Box and Print, and Proof and Print
functions cannot be specified when the “Per Page Setting” setting is
specified.
Printing with transparency interleaves
If “Transparency” is selected as the paper type, you can select the “Trans-
parency Interleave” check box to enable the transparency interleave setting.
By selecting the “Transparency Interleave” check box, overhead projector
transparencies can be inserted between the printed pages.
1
Click the Cover Mode tab.
2
Select the “Transparency Interleave” check box.
3
From the “Transparency Interleave” drop-down list, specify the printing
conditions.