Konica Minolta bizhub 200 - Manual (Page 342)

Various settings 11
200/250/350 11-75
2
Reminder
To apply any changes to settings for “NetBIOS Name”, “Printing Service
Name”, or “WorkGroup Name”, restart this machine (turn the main power
off, then on again).
When turning the machine off, then on again with the main power switch,
wait about 10 seconds to turn the machine on after turning it off. The ma-
chine may not operate correctly if it is turned on immediately after being
turned off.
2
Note
Only the PCL printer driver can be used with Windows printing.