Konica Minolta bizhub 200 - Manual (Page 64)

Setting up network printing 3
200/250/350 3-5
To obtain the Peer to Peer Printing Tool, consult the dealer where you pur-
chased this machine.
To specify the driver settings when installing the Peer to Peer Printing Tool,
refer to “Port 9100 Printing (Windows 98 SE/Me/2000/XP/Vista/Server
2003)” on page 3-15.
When using Windows printing, you can perform network printing without in-
stalling the Peer to Peer Printing Tool software. For details, refer to “Windows
printing” on page 3-10.
2
Note
Before setting up network printing, install the printer driver. For details,
refer to “Installing the printer driver” on page 2-1.
To perform network printing, change the printer port for the installed
printer driver to one for a network connection, and then change the set-
tings on this machine as necessary. For an IPP connection, it is neces-
sary to install the printer driver first.
Only the PCL printer driver can be used with Windows printing. If network
printing with the PostScript printer driver, use LPR printing or Port 9100
printing.
Network printing in a NetWare environment
NetWare version Protocol used Emulation Service mode
NetWare 4.x IPX NDS/Bindery Pserver/Nprinter
NetWare 5.x/6 IPX NDS Pserver
TCP/IP NDPS(lpr)