Konica Minolta bizhub 200 User Manual
Page 85
Setting up network printing
3
200/250/350
3-26
6
In Administrator mode of PageScope Web Connection, select “Com-
mon Setting”, then “NetWare” from the Network tab, and then specify
the following settings.
–
Enable NetWare: Select “Enable”.
–
Frame Type: Select “Auto Detect”. (Select the frame type according
to the network environment.)
–
Bindery/NDS: Select “Bindery”.
–
Print Server Name: Specify the print server name created in step 4.
–
Print Server Password: Specify only when setting from the NetWare
server. (Displayed by “••••”.) If changing the password, delete
“••••”, and then input the password.
–
Preferred File Server: Specify the name of the file server that con-
nects to the Pserver.
–
Print Queue Scan Rate: Specify “1”. (Change as necessary.)
–
Mode: Select “PServer”.
–
Printer Number: Specify “255”. (Set the number assigned to the
printer (0 to 254) or 255.)
7
Restart this machine (turn the main power off, then on again).