Konica Minolta bizhub 200 - Manual (Page 88)

Setting up network printing 3
200/250/350 3-29
6
Restart this machine (turn the main power off, then on again).
7
Use the NetWare server console to load PSERVER.NLM.
8
Use the NetWare server console to display the print server screen, and
then check that “XXX” (created printer) is shown as “Waiting for Job”
for the connected printer (0).
2
Reminder
When turning the machine off, then on again with the main power switch,
wait about 10 seconds to turn the machine on after turning it off. The ma-
chine may not operate correctly if it is turned on immediately after being
turned off.
For NetWare 4.x/5.x/6 Print Server mode (NDS)
To use the Print Server mode, IPX protocol must be loaded on the NetWare
server.
1
Log on to NetWare as an administrator from a client computer.
2
Start up NWadmin.
3
Select either the organization or organizational unit container that of-
fers the print service, and then click “Print Services Quick Setup (non-
NDPS)” on the “Tools” menu.
4
Enter the appropriate names in the “Printer Server Name”, “Printer
Name”, “Print Queue Name”, and “Print Queue Volume” fields, select
“Other/Unknown” from the “Printer Type” field, and then click the
[Create] button.
– For queue user privileges, printer notification option, assignment of
multiple queues, and passwords, refer to the NetWare documenta-
tion, and specify settings as necessary.