Konica Minolta bizhub 200 - Manual (Page 131)

Setting up the PCL driver 5
200/250/350 5-8
3
Select the desired setting from the “Paper Type” drop-down list, and
then click the [OK] button.
Only the paper types that can be selected in each input tray are
displayed.
If “Transparency” is selected as the paper type in “Auto” of Paper
Source, you can specify transparency interleaving.
When the “Transparency Interleave” check box is selected, the Trans-
parency Interleave Settings dialog box appears, allowing you to select
the source of the interleaf paper.
The Transparency Interleave Settings dialog box can also be displayed
by clicking the [Settings] button.
Specifying duplex/booklet printing
You can print a document onto both sides of a page or in a booklet format
(two facing pages). This comes in handy when you want to bind multiple-
page documents.
1
Click the Setup tab.
2
From the “Print Type” drop-down list, select “Duplex” or “Booklet”.
2
Note
The binding orientation can be specified from the “Binding Position”
drop-down list.