Konica Minolta bizhub 200 - Manual (Page 188)

Setting up the VXL/VPS driver (Windows Vista) 7
200/250/350 7-3
Layout tab
Finish tab
Cover Mode tab
Collate Specifies whether to print multiple copies in sets.
Offset When printing multiple copies, shifts the output position of
each set.
Paper Settings for Each Tray Specifies the paper type for each paper tray.
Item Function
Item Function
Combination Prints multiple pages on one page, or prints one sheet of an
original document divided on multiple pages. Details can
be specified by clicking the [Combination Details] button.
Rotate 180 Prints the image rotated 180°.
Skip Blank Pages Does not print blank pages in the data.
This function is only available with the Windows Vista PCL
driver (VXL).
Print Type Specifies duplex printing and booklet printing.
Binding Direction Specifies the binding position.
Binding Margin Specifies the binding margin. Click the [Binding Margin
Settings] button to specify the margin values.
This function is only available with the Windows Vista PCL
driver (VXL).
Item Function
Staple Specifies stapling.
Saddle Stitch Specifies to saddle stitch a printed document.
Punch Specifies hole punching.
Output Tray Specifies the tray where to output the printed pages.
Item Function
Front Cover Attaches a front cover page.
Front Cover Tray Selects the paper tray for the front cover.
Back Cover Attaches a back cover page.
Back Cover Tray Selects the paper tray for the back cover.
Per Page Setting Inserts paper between pages and switches the paper and
tray for each page.
This function is only available with the Windows Vista PCL
driver (VXL).