Konica Minolta bizhub 200 - Manual (Page 204)

Setting up the VXL/VPS driver (Windows Vista) 7
200/250/350 7-19
2
Reminder
The center staple and fold function is available only when optional finisher
and saddle kit are installed.
1
Click the Finish tab.
2
Select the “Center Staple and Fold” check box.
Hole punching
Holes can be punched into the printed document.
2
Reminder
The hole punch function is available only when the punch kit is installed
on the optional finisher.
1
Click the Finish tab.
2
Select the “Punch” check box.
3
From the drop-down list, specify the number of punched holes.
2
Note
The hole-punch position changes according to the binding position spec-
ified from “Binding Direction”.
Specifying the output tray
You can specify the tray to which the printed document is output.
1
Click the Finish tab.
2
From the “Output Tray” drop-down list, specify the output tray.