Konica Minolta bizhub 200 - Manual (Page 221)

Setting up the VXL/VPS driver (Windows Vista) 7
200/250/350 7-36
7.10 Specifying the Settings tab settings
Specifying the default settings
You can change the default settings for displaying the confirmation messag-
es or the dialog box for entering the authentication settings.
1
Click the [Start] button, and then click “Control panel”, “Hardware and
Sound”, and “Printers”.
– If the control panel is in the classic view, double-click “Printers”.
2
Right-click the icon of the installed printer, and then click “Properties”.
3
Click the Settings tab.
4
Specify settings for the following:
– EMF Spool: When using an original system environment, select this
check box if a metafile (EMF) spool is required. This function is only
available with the Windows Vista PCL driver (VXL).
– Display Constraint Message: Specifies whether to display a mes-
sage when functions that cannot be specified at the same time
were enabled from the printer driver.
– Display paper set in Print Server Properties: Specifies whether to
use the paper that was added in [Server Properties] of the printer
folder.