Konica Minolta bizhub 200 - Manual (Page 229)

Setting up the PPD driver (Windows) 8
200/250/350 8-2
Graphics tab
Device Options tab
To specify the following printer-specific options, right-click the printer icon in
the Printers window, and then click “Properties” in the menu that appeared.
You can specify the following options by right-clicking the printer icon in the
Printers window, then clicking “Properties”.
Item Function
Resolution Specifies the print resolution.
Halftone Specifies the halftone number of lines and the pattern angle.
Special Prints a negative or mirror image.
Scaling Specifies the enlargement and reduction ratio.
Item Function
Collate Specifies whether to print multiple copies in sets.
Offset When printing multiple copies, shifts the output position of each
set.
Binding Position Specifies the binding position.
Duplex Specifies duplex printing.
Combination Specifies booklet printing.
Staple Performs stapling.
Hole-Punch Performs hole punching.
Center Staple and Fold Folds the printouts in half and staples.
Front Cover Page Attaches a front cover page.
Back Cover Page Attaches a back cover page.
Paper Tray (Cover Page) Selects the input tray for the front cover page and back cover
page.
Transparence Interleave Inserts interleaves between overhead projector transparencies.
Paper Tray
(Transparence Interleave) Selects the input tray for the transparency interleaves.
Wait Mode Stops printing temporarily after part of the document has been
printed so that the proof print can be checked.
Item Function
Available printer memory Specifies the memory installed on this machine.
Installable options Specifies the options installed on this machine.