Konica Minolta bizhub 200 - Manual (Page 260)

Setting up the PPD driver (Mac OS X) 10
200/250/350 10-11
Finishing
You can specify these options when using the staple or hole punch finisher
functions of this machine.
1
From the “File” menu, select “Print”.
2
Select “Finishing”.
3
Specify settings for the following:
– Collate: Prints multiple copies in sets.
– Offset: Specifies offset.
– Duplex: Performs duplex printing.
– Output Tray: Selects the output tray.
– Binding Position: Specifies the binding position.
– Combination: Specifies booklet printing.
– Staple: Performs stapling.
– Hole-Punch: Performs hole punching.
– Center Staple and Fold: Folds the printouts in half and staples.