Konica Minolta bizhub 200 - Manual (Page 270)

Various settings 11
200/250/350 11-3
2
Note
To quit specifying the printer settings, touch [Enter] until the screen for
the Copy, Fax, Scan, or Box mode appears.
The default screens are shown below and each setting can be specified.
MFP Set
!
Detail
For details on displaying the MFP Set screen, refer to “Printer settings”
on page 11-1.
Proof-Print Hold Time
The print data is deleted if the set time is not specified for printing the data.
You can specify to print data that is being held in 10, 20, or 30 minutes. (De-
fault setting: 10 min.)
% After changing the setting, touch [Enter].
Basic Setting screen Font screen