Font - cr/lf mapping, Font - cr/lf mapping -14 – Konica Minolta bizhub 200 User Manual

Page 281

Advertising
background image

Various settings

11

200/250/350

11-14

2

Note

A value outside the allowable range cannot be specified. Type in a value
within the allowable range.

To cancel changes to the settings, touch [Cancel].

Font - CR/LF Mapping

You can specify the control code substitution method when printing test da-
ta. (Default setting: OFF)

%

On the Font screen, touch [CR/LF Mapping] to display the setting
screen. After changing the setting, touch [Enter].

OFF: Does not perform substitution.

Mode1: Substitutes CR for CR-LF.

Mode2: Substitutes LF for CR-LF. Substitutes FF for CR-FF.

Mode3: Substitutes CR and LF for CR-LF.
Substitutes FF for CR-FF.

Advertising
This manual is related to the following products: