Konica Minolta bizhub 200 - Manual (Page 285)

Various settings 11
200/250/350 11-18
Printer Setting
!
Detail
For details on displaying the Printer Setting screen, refer to “Administra-
tor settings” on page 11-16.
Parallel Setting
You can specify the mode for using an optional parallel interface. (Default
setting: ECP)
% After changing the setting, touch [Enter].
–
Compatible: Corresponds to both Nibble and ECP.
– Nibble: Only for Nibble.
– ECP: Only for ECP.
Timeout
You can set the time until a communication timeout occurs. (Default setting:
300 sec)
% After using the keypad to type in a value, touch [Enter].