Konica Minolta bizhub 200 - Manual (Page 292)

Various settings 11
200/250/350 11-25
Specifying whether to enable Access Lock, the Secure Print selection
method, or whether to enable a password rule (mode 469)
Specify whether to lock access if the password is entered incorrectly, specify
the selection method to check a Secure Print, or specify whether to apply a
password rule.
Settings at the time of purchase
Specifying the settings
The grayed out cells are the settings at the time of purchase. The reference
pages for each function are shown in the far right column.
Bit 7 6 5 4 3 2 1 0
Setting 0 0 0 0 0 0 0 0 (HEX: 00)
Bit Description Setting Description Page
Refer-
ence
7 Specify whether to
lock access when a
password (account
track and administra-
tor passwords) is en-
tered incorrectly three
times. 0 Does not lock access p. 11-88
1 Locks access
6 --------------------- 0 * Do not change this bit
when specifying settings
for this function. ----------
5 Specify the Secure
Print selection meth-
od. 0 Specifies the ID and pass-
word, and displays the cor-
responding document list. p. 11-86
1 Displays the document list
with an ID and enters the
password when specifying
the operation.
4 For security, specify
whether to apply a
password rule. 0 Do not apply a password
rule p. 11-81
1 Apply a password rule
3, 2, 1, 0 --------------------- 0000 * Do not change these bits
when specifying settings
for this function. ----------