Konica Minolta bizhub 200 - Manual (Page 30)

Overview 1
200/250/350 1-7
1.3 Setting up the system
In order to use this printing system, it must first be set up.
Setup consists of connecting this machine to a computer and installing the
printer driver onto the computer being used.
To set up the printing system
Setup the printing system as described below.
1
Connect this machine to a computer. (Refer to “Connectable interfac-
es” on page 1-5.)
2
Install the printer driver. (Refer to “Installing the printer driver” on
page 2-1.)
3
When using a network connection, set up the network. (Refer to “Set-
ting up network printing” on page 3-1.)
4
Check the setup by printing a test page. (Refer to “Test printing” on
page 4-2.)
5
Install the screen fonts.
– The User Software CD-ROM and PostScript Printer Driver CD-ROM
contain the Latin TrueType fonts as the screen fonts.
– Install the screen fronts after adding the operating system standard
fonts.
– For details, refer to Help of the operating system.
– The screen fonts are located in the “Screenfont” or “Screenfonts”
folder on the CD-ROM.
– To install the Macintosh fonts, install the fonts after decompressing
them.
Installation of the printer driver may differ depending on the connection
method used with this machine in addition to the operating system of the
computer and the type of printer driver being used.