Konica Minolta bizhub 200 User Manual

Page 363

Advertising
background image

Troubleshooting

12

200/250/350

12-4

12.2

Unable to specify desired settings or unable to print
as specified

Perform these troubleshooting procedures if you cannot specify the desired
settings in the printer driver, or if the print results do not represent the set-
tings that have been specified.

2

Note

Some of the printer driver functions cannot be combined with other func-
tions.

Symptom

Probable cause

Action

A printer driver setting
cannot be selected.

Some functions cannot be com-
bined.

Do not try to select settings that
are not available.

The “Conflicts” message
with “Unable to Select” or
“Function Canceled” ap-
pears.

An incorrect combination of
functions has been specified.

Check the settings and specify
the functions correctly.

Printing is not performed
as specified.

Incorrect settings are specified.

Check each setting in the printer
driver.

A combination of functions, al-
though possible in the printer
driver, is not possible with this
machine.

The paper size, orientation, and
other settings specified in the
application have priority over
those specified in the printer
driver.

Enter the correct settings in the
application.

The watermark cannot be
printed.

The watermark is not correctly
set.

Check the watermark settings.

The watermark density is set to
a level that is too low.

Check the density settings.

Watermarks cannot be printed
in graphics applications.

No watermark can be printed in
this case.

The staple function can-
not be specified.

Stapling is not possible if “Paper
Type” is set to “Thick” or
“Transparency”.

Check each setting in the printer
driver.

The staple function requires op-
tional finisher.

Install the required optional fin-
isher and enable it using the
printer driver.

Stapling cannot be per-
formed.

If there are a large number of
pages to be printed, stapling
cannot be performed.

Print by specify the number of
pages per set for the number of
pages that can be stapled.

Stapling is not possible if the
document contains pages of dif-
ferent sizes.

Check the document.

Advertising
This manual is related to the following products: