Konica Minolta bizhub 200 - Manual (Page 72)

Setting up network printing 3
200/250/350 3-13
3.5 LPR printing
The LPR print service is supported as standard in Windows 2000, Windows
XP, Windows Vista, Windows NT 4.0, and Windows Server 2003. TCP/IP is
used as the network protocol.
Operations on this machine
Set the IP address for this machine. For the setting procedure, refer to “Set-
ting the IP address for this machine” on page 3-6.
Printer driver settings
For Windows 2000/XP/Vista/Server 2003
1
For Windows 2000, click the [Start] button, point to “Settings”, and
then click “Printers”.
For Windows XP/Server 2003, click the [Start] button, and then click
“Printers and Faxes”.
For Windows Vista, click the [Start] button, and then click “Control pan-
el”, “Hardware and Sound”, and “Printers”.
– If “Printers and Faxes” does not appear in the Start menu in Win-
dows XP/Server 2003, open the Control Panel from the Start menu,
select “Printers and Other Hardware”, and then select “Printers and
Faxes”.
For Windows Vista, if the control panel is in the classic view, dou-
ble-click “Printers”.
2
Right-click the icon of the installed printer, and then click “Properties”.
3
On the Ports tab, click the [Add Port] button.
4
In the “Available Printer Ports” list, select “Standard TCP/IP Port”, and
then click the [New Port] button.
5
When the Add Standard TCP/IP Printer Port Wizard starts up, click the
[Next] button.
6
In the “Name of printer or IP address” box, enter the IP address for this
machine, and then click the [Next] button.
7
Select “Custom”, and then click the [Settings] button.
8
Select “LPR”, enter “Print” in the “Queue Name” box.
– The uppercase letters and lowercase letters must be entered cor-
rectly.