Setting the macintosh computer, For mac os x – Konica Minolta bizhub 200 User Manual

Page 94

Advertising
background image

Setting up network printing

3

200/250/350

3-35

5

To apply the settings, restart this machine (turn the main power off,
then on again).

2

Reminder

When turning the machine off, then on again with the main power switch,
wait about 10 seconds to turn the machine on after turning it off. The ma-
chine may not operate correctly if it is turned on immediately after being
turned off.

Setting the Macintosh computer

Use the Macintosh computer that is connected to specify the TCP/IP and
AppleTalk settings.

2

Note

For network settings, consult the network administrator.

For printer driver installation, refer to “Installing the printer driver” on
page 2-1.

For Mac OS X

1

On the Apple menu, select “System Preferences”.

2

Click the “Network” icon.

3

From “Show”, select “Built-in Ethernet”.

4

Click the TCP/IP tab.

5

Select the items from “Configure” that correspond to the network set-
tings for the Macintosh computer that is connected to the network, and
then set the IP address and subnet mask.

6

If using an AppleTalk connection, click the AppleTalk tab, and then
check that the “Make AppleTalk Active” check box is selected.

7

Click the close button at the top left of the dialog box.

The “Apply configuration changes?” message appears.

8

Click the [Apply] button.

The AppleTalk and Ethernet settings are saved.

Advertising
This manual is related to the following products: