Konica Minolta Printgroove - Manual (Page 20)

Printgroove ::Admin
16 User’s Reference Guide Rev. 1.4
3.4.3.3 Licensing: Automatic Update
Upon receiving the key file update from Konica Minolta, make sure all users are logged off the
system, login as sysadmin and go to the Licensing > Manage > Auto Update menu. Enter the
URL received from your Konica Minolta sales channel.
Enter your proxy serve information, if necessary. Click Update to finish or Cancel to revert to the
last saved settings.
3.4.3.3.1 Licensing Requirements
The Printgroove license requirements for updating the context files can prevent use of the system
if not followed correctly. Please remember these important items prior to changing any of your
licensing information.
•
The update files are serial number sensitive, so they will only work with the specific security
key for which they are written.
•
An update file can only be used once. Re-applying the same update file will show an error
message that the update failed.
•
A damaged security key can be replaced through your Konica Minolta sales channel. Use a KM
RMA form and ship the broken/damaged dongle to Konica Minolta. Your security key will be
replaced and you will follow the steps in the previous section to perform a manual update using
Licensing > Manual Update. (Please note that if replacing a damaged key, you may also have
to go to the Licensing > Owner screen and enter the Serial Number of the replacement key.