Printgroove ::admin, 4 settings: session – Konica Minolta Printgroove User Manual
Page 32
Printgroove ::Admin
28
User’s Reference Guide
Rev. 1.4
3.6.4 Settings: Session
The single field on this page is used to set the session timeout value. This value sets the amount of
time in seconds (the minute conversion is shown for clarity) after which an inactive user session will
result in an automatic logout from
Printgroove
.
To change the timing, change the value in the Session Timeout field and click Save. The
conversion time will change or you. (The Reset button resets the field to the last saved setting.)
If a user is logged into
Serve
, for example, and they do not use the system for more than an hour
(first screen above) or 15 minutes (as set in the second screen), they will be automatically logged
out, as shown in the third screen below.