Konica Minolta Printgroove - Manual (Page 23)

Printgroove ::Admin
Rev. 1.4 User’s Reference Guide 19
Roll Logs Every: Choices are day or week. “Rolling the logs” puts the latest log file into the
database to be used as the latest backup.
Only roll if the log is larger than: The default size of a log is set at 1MiB. You can set them larger
if desired.
Compress old log files using: This can be set for No Compression or Compress as .gz, creating
a “gzip” file.
Number of old log files to retain: You can set the number of log files to store. When the number
is exceeded, the oldest file is deleted.
Logging Level:
The system can record log information at two levels:
•
Standard (minimal information recorded) and
•
Verbose (very detailed information recorded). You should only use Verbose when
troubleshooting an issue, since it records much more data which can impact system
performance.
Reset: The Reset button will reset the field information and settings to the last saved settings.
Save: Saves any changes you make to the logging settings.
3.6 Settings
The Settings menus allow the Administrator to configure basic system defaults for the
Printgroove server, including e-mail, language, LDAP, session timeout, and SSL certification.
3.6.1 Settings: E-mail
Use the Settings > E-mail menu to configure the SMTP e-mail server that Printgroove will use
to send system-related e-mails. The system sends out a variety of e-mail during the course of daily
operation. Use the first field on this page to set a From address to be used on all system e-mails.
Enter the SMTP server address and port number of the e-mail server. Enter the Signature you
want sent with each e-mail.