Konica Minolta Printgroove - Manual (Page 31)

Printgroove ::Admin
Rev. 1.4 User’s Reference Guide 27
3.6.3.2 Other LDAP Login Authentication
If Printgroove needs to be configured to use another common type of LDAP server, such as
Open LDAP, choose Login Authentication from the pull-down menu.
Printgroove Login Authentication attempts to login to the LDAP server as a user. Users stored in
LDAP tree are allow to login with read-only access. If a user can login to the LDAP server, they are
then assumed to be valid Printgroove users. Enter these fields with your appropriate data:
Host Address: the hostname or IP Address of your LDAP Server
Port: the port on which the LDAP Server is “listening” – usually 389
User Name Field: the field in the LDAP tree which contains the user identification (e.g. uid =
joeuser)
User Tree Root: the branch where user accounts are stored. This is appended to the user
name when attempting to login (e.g. uid = joeuser, ou = people, dc = sec, dc = net)
This may be tested by clicking on the Test button, which will attempt to authenticate any LDAP
user (meaning it does not require a valid Printgroove account for the user.) Reset will reset the
fields back to the last Saved settings.