Konica Minolta bizhub C250 - Manual (Page 129)

3 Specifying Settings From the Control Panel
3-18 C250
Sp
ec
ifyin
g
Set
tin
gs
F
ro
m
th
e
Co
nt
ro
l Pa
ne
l
Chapter 3
– To enter the IP address, touch [IP Address Input], and then enter
the value. To change an entered value, touch [
←
] and [
→
] to move
the cursor to the desired position, and then type in the desired val-
ue.
– If [IP Address Input] is touched after entering the host address, the
host address is cleared.
– If the IP address is entered first, then [Host Name Input] is touched,
the IP address that was entered is displayed in the text box.
– Enter the host name and file path using capital letters.
7
Touch [OK].
8
Touch [File Path] and type in the file path using the keyboard that ap-
pears on the screen.
9
Touch [OK].
10
Touch [
←
Back] or [Fwd.
→
].
11
Touch [User ID] and type in the user ID using the keyboard that appears
on the screen.
12
Touch [OK].
13
Touch [Password] and type in the password using the keyboard that
appears on the screen.
14
Touch [OK].
15
Touch [Index] and touch the desired button.
– This specifies the characters used to index the destination.
– For destinations that are often used, specify [Main] at the same
time, and it will be easier to search.
– If the first character of the name is a letter, the first character is au-
tomatically registered as the indexing character.