Konica Minolta bizhub C250 User Manual
Page 66
Advertising
Scanning Documents
2
C250
2-33
Scan
nin
g
Do
cu
men
ts
Chapter 2
3
Touch [Scan Settings] to check the specified scan settings. The spec-
ified settings can also be changed.
–
For details on the scan settings, refer to “Specifying the Scan Set-
tings” on page 2-42.
4
After checking the settings, touch [OK].
5
Load the document into the ADF (optional) or position it on the original
glass of the machine.
6
Press the [Start] key on the control panel.
The document is scanned, and the data is sent.
2
Note
Do not turn off the machine until the scanned jobs disappear from the job
list.
Advertising
This manual is related to the following products: