Konica Minolta bizhub C250 User Manual
Page 68
Advertising
Scanning Documents
2
C250
2-35
Scan
nin
g
Do
cu
men
ts
Chapter 2
3
Select the desired destinations, and then touch [OK].
4
Touch [Scan Settings], and then specify the scan settings.
–
For details on the scan settings, refer to “Specifying the Scan Set-
tings” on page 2-42.
5
After specifying the settings, touch [OK].
6
Load the document into the ADF (optional) or position it on the original
glass of the machine.
7
Press the [Start] key on the control panel.
The document is scanned, and the data is sent.
Advertising
This manual is related to the following products: