Konica Minolta Bizhub 215 - Manual (Page 105)

bizhub 215 7-6
7.2 Store Address 7
6
Enter the destination name using the Keypad, and press the OK key.
% For details on how to enter a character string, refer to [Quick Guide Copy/Print/Fax/Scan Opera-
tions].
% The destination name can be specified with up to 20 characters.
7
Enter a destination fax number using the Keypad.
% A fax number can be specified using up to 30 digits.
% If an optional Image Controller IC-209 or Network Card NC-504 is installed on this machine, an
E-mail address can be entered into a destination.
% When not specifying the F-code transmission, baud rate, or transmission time, go to Step 10.
% When specifying the F-code transmission, baud rate, or transmission time, press ,, and go to the
next step.
% For details on the F code such as the SUB address and password, refer to page 4-2.