4 convenient transmission and receiving functions, 1 transmission with f-code (f-code tx), 1 specifying an f code at fax transmission – Konica Minolta Bizhub 215 User Manual
Page 56: Convenient transmission and receiving functions, Transmission with f-code (f-code tx) -2, Specifying an f code at fax transmission -2, 4convenient transmission and receiving functions
bizhub 215
4-2
4.1
Transmission with F-Code (F-Code TX)
4
4
Convenient Transmission and Receiving Functions
4.1
Transmission with F-Code (F-Code TX)
This machine supports F-code communication defined by the Communications and Information network As-
sociation of Japan (CIAJ).
The F code is a mail box function that uses SUB (SUB address), SEP (selective polling), [SID], and [PWD]
(password) that are defined in the G3 standard of the International Telecommunication Union (ITU-T).
Specify the following F code using the Keypad to suit your environment.
Tips
-
The F-code function is available only in fax machines that supports the F-code function. Before config-
uring settings, check that both the machines support the F-code function.
-
If an F code (SUB or SID) is registered in the one-touch dial or speed dial in advance, you can establish
an F-code communication.
-
A confidential communication is available between machines compatible with an F code.
4.1.1
Specifying an F code at fax transmission
Specify an F code when typing in a fax number directly using the Keypad.
1
Enter a destination fax number using the Keypad.
2
Press ,.
3
Use +, to select [SUB, SID SETTING], and press the OK key.
4
Enter a SUB address using the Keypad, and press the OK key.
% To correct a numeric value, press the Start/Stop key.
% When entering a password, go to Step 5.
% When not entering a password, press the OK key, and go to Step 6.
5
Enter the password using the Keypad, and press the OK key.
% To correct a numeric value, press the Clear/Stop key.
6
Press the Start key.
This starts scanning and sending.
F-Code
Contents
SUB
Specify this option when sending a fax using an F code. This code can be
specified using up to 20 digits.
PASSWORD (SID)
Specify this option when restricting recipients with a password. This code
can be specified using up to 20 digits.
POLL ID (SEP)
Specify this option when the recipient makes a call to ask the sender to
send the original prepared in the sender side to the recipient.