Konica Minolta Bizhub 215 - Manual (Page 35)

bizhub 215 3-9
3.4 Specifying a destination 3
3.4.4 Speed dial
Register a destination number in Speed Dial in advance; you can specify a destination with a speed dial
number to send a fax.
d
Reference
For details on how to register the speed dial, refer to page 7-8.
1
Load the original.
% For details on how to load the original, refer to page 3-4.
2
When necessary, specify a desired option for [QUALITY].
% For details on [QUALITY], refer to page 3-6.
3
Press the Speed Dial key.
4
Enter a 3-digit speed dial number using the Keypad, and press the OK key.
% If you make a mistake in entering a number, press the Clear/Stop and type in a correct number from
the beginning.
5
Press the Start key.
This starts scanning and sending.
% To stop sending, press the Clear/Stop key, and select [YES] in the displayed screen.