Konica Minolta Bizhub 215 User Manual

Page 106

Advertising
background image

bizhub 215

7-7

7.2

Store Address

7

8

Use +, to select a setting item, and press the OK key.

% If [SUB, SID SETTING] is selected: Enter the SUB address and password, and press the Back key.

% The SUB address and password can be specified using up to 20 digits.

% When [MODEM SPEED] is selected: Use +, to select [33.6Kbps], [14.4Kbps], or[9.6Kbps], and

press the Back key.

% If [BATCH TIME] is selected: Enter the transmission time using the Keypad, and press the Back key.

% Repeat this procedure until all the required settings are completed.

9

Select [RETURN], and press the OK key.

This returns to the screen where a fax number can be entered.

10

Press OK.

This registers settings, and returns to the Store Address screen.

7.2.3

Changing or deleting a one-touch dial destination

1

Press the Utility key.

2

Use +, to select [DIAL REGISTRATION], and press the OK key.

3

Use +, to select [ONE-TOUCH DIAL], and press the OK key.

4

Press the One-Touch Dial Key you want to change or delete.

5

Use +, to select [EDIT] or [DELETE], and press the OK key.

% If [EDIT] is selected, go to the next step.

% If [DELETE] is selected, the information registered in the One-Touch Dial Key is deleted, and the

display returns to the Store Address screen.

6

Change the destination name, fax number, F code (SUB address or password), or baud rate.

After all settings are completed, the display returns to the Store Address screen.

d

Reference

For details on how to change each setting, refer to Steps 6 to 8 in page 7-5.

Advertising