Konica Minolta Bizhub 215 - Manual (Page 122)

bizhub 215 7-23
7.5 Fax RX setting 7
7.5.2 Specifying the memory RX mode
1
Press the Utility key.
2
Use +, to select [FAX RX OPERATION], and press the OK key.
3
Use +, to select [MEMORY RX MODE], and press the OK key.
4
Use +, to select [ON], and press the OK key.
5
Enter the starting time using the Keypad, and press the OK key.
6
Enter the ending time using the Keypad, and press the OK key.
7
Enter a 4-digit password using the Keypad, and press the OK key.
% When not registering a password, press the OK key without entering any digits.
This returns to the fax RX settings screen.
7.5.3 Releasing the memory RX mode
The memory RX mode is released automatically at the ending time, and the received original is printed out.
If the ending time is not specified or if you want to release the memory RX mode before the ending time, follow
the steps shown below.
1
Press the Utility key.
2
Use +, to select [FAX RX OPERATION], and press the OK key.
3
Use +, to select [MEMORY RX MODE], and press the OK key.
4
Use +, to select [OFF], and press the OK key.
% If a password is specified, go to the next step.
% If a password is not specified, the received original in the memory is printed out, and the display
returns to the fax RX settings menu.
5
Enter a 4-digit password using the Keypad, and press the OK key.
This returns to the fax RX settings screen.