Konica Minolta Bizhub 215 - Manual (Page 34)

bizhub 215 3-8
3.4 Specifying a destination 3
3.4.3 One touch dial
Register a destination number in a One-Touch Dial Key in advance; you can only press the One-Touch Dial
Key to specify a target destination.
d
Reference
For details on how to register a destination in a one-touch dial key, refer to page 7-5
1
Load the original.
% For details on how to load the original, refer to page 3-4.
2
When necessary, specify a desired option for [QUALITY].
% For details on [QUALITY], refer to page 3-6.
3
Press a destination key among One-Touch Dial Key 01 to 32.
% One-touch dial keys 01 to 16 are available when the Switching Plate is closed downward.
% One-touch dial keys 17 to 32 are available when the Switching Plate is opened upward.
% If you press an incorrect One-Touch Dial Key, press the Clear/Stop key to cancel it.
4
Press the Start key.
This starts scanning and sending.
% To stop sending, press the Clear/Stop key, and press OK in the displayed screen.