Konica Minolta Bizhub 215 - Manual (Page 71)

bizhub 215 5-5
5.2 Configuring transmission settings 5
5.2 Configuring transmission settings
Press , in the E-mail address entry screen to configure the following transmission settings.
- Transmission time
- Maximum transmission size
- Maximum transmission resolution
- Compression coding method
To specify the transmission time, select [TIMER SETTING]. To specify the maximum transmission size, max-
imum transmission resolution, and compression coding method, select [BASIC/ADVANCED].
5.2.1 Specifying the transmission time
d
Reference
For details on the basic transmission procedure, refer to page 5-2.
1
Load the original, and specify a destination.
2
Press ,.
3
Use +, to select [TIMER SETTING], and press the OK key.
4
Enter the transmission time using the Keypad, and press the OK key.
5
Press the Back key.
This returns to the E-mail address entry screen.
5.2.2 Selecting the Basic or Advanced mode
d
Reference
For details on the basic transmission procedure, refer to page 5-2.
1
Load the original, and specify a destination.
2
Press ,.
3
Use +, to select [BASIC/ADVANCED], and press the OK key.
4
Use +, to select [BASIC] or [ADVANCED], and press the OK key.
% Selecting [BASIC] returns to the FAX OTHER SETTINGS screen.
% If [BASIC] is selected, each item is set as shown below.
[MAX TX SIZE]: [A4]
[MAX QUALITY]: [FINE]
[CODING METHOD]: [MH]
% If you select [ADVANCED], go to a desired step in page p. 5-6.